Clients Equipment

For Inquiries on these JBL’s Contact Peter B. Lewis 206-499-1401 cell – or Email peterb@AUDISEE.com

Control 29AV-1

Premium Indoor / Outdoor Monitor Speaker
speakersThe Control® 29AV-1 provides improved voicing for extremely fl at, high fi delity performance, extended
bandwidth and well-controlled defi ned coverage from a compact loudspeaker
.
Features:
Extended bandwidth, extremely smooth frequency response.
110° x 85° HF coverage, rotatable horn.
110 W transformer for 70 V or 100 V lines, with 8 W thru.
SonicGuard™ overload protection.
200 mm (8 in) Kevlar cone woofer,
25 mm (1 in) titanium diaphragm compression driver.
Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
Sealed input panel cover and screwdown input terminals.

Specifications:
Frequency Range : 40 Hz –18 kHz
(-10 dB)
Power Capacity : 300 W Continuous
Program Power
150 W Continuous
Pink Noise
Transformer Taps : 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110
W, 55 W, & 28 W Thru Position: 8 nominal
Frequency Response : 45 Hz – 18 kHz
( ± 3 dB)
Maximum SPL @ 1m : Short-Term: 120 dB; Long-Term: 114 dB
Nominal Sensitivity : 90 dB (2.83V / 1m)
Nominal Coverage Angle : 110° H x 85° V, rotatable
Directivity Factor (Q) : 7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI) : 8.6 dB, averaged 500 Hz to 16 kHz
Nominal Impedance : 8 ohms
Minimum Impedance : 6.3 ohms @ 230 Hz
Crossover Network : 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Low Frequency : 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
High Frequency : 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure Material : High impact polystyrene
Grille : Thermoset composite coated steel, WeatherMax multi-layer foam
Overload Protection : Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
Environmental : IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Terminations : Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers.
Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12
AWG/2.5 mm2).
Safety Agency Rating : Transformer is listed per UL1876
Colors : Black or white (-WH)
Dimensions (H x W x D) : 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net Weight (ea) : 12.2 kg (26.8 lb.)
Shipping Weight (ea) : 14.0 kg (30.8 lb.)
Included Accessories : 1 pc MTC-PC2 input panel cover, InvisiBall
mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
Optional Accessories : MTC-29CM to install speaker down from the
ceiling MTC-29UB U-bracket

Control 30

Three-Way High Output Indoor / Outdoor Monitor Speaker
jblspeakersThe Control 30 utilizes high power components, computer optimized horn and coaxial component design, patent-pending cabinet manufacturing techniques, and a complex network to achieve smooth high fidelity performance, extended bandwidth and well-controlled, defined coverage from a compact loudspeaker.

Features:
Extended bandwidth, extremely smooth frequency response.
Fully outdoor-capable design, featuring WeatherMax™.
120° x 110° HF coverage.
150 W transformer for 70 V or 100 V lines, with 8 thru.
SonicGuard® overload protection.
250 mm (10 in) fiberglass / Kevlar® cone LF woofer, with neodymium
magnet coaxial 125 mm (5 in) anodized aluminum cone MR, and 25 mm (1
in) titanium diaphragm compression driver.
Includes InvisiBall® mounting hardware, plus ten 6 mm attachment points
for suspension and optional U-bracket.
Sealed input panel cover and screw-down input terminals.

Specifications :
Frequency Range : 38 Hz – 17 kHz (-10 dB)
Power Capacity : 500 W Continuous Program Power 250 W Continuous Pink Noise
Transformer Taps : 70 V: 150 W, 75 W, 38 W, 19 W 100 V: 150 W, 75 W, 38 W Thru Position: 4 nominal
Frequency Response : 40 Hz – 16 kHz ( ± 3 dB)
Maximum SPL @ 1m : Short-Term: 123 dB; Long-Term: 117 dB
Nominal Sensitivity : 93 dB, 1W @ 1m (3.3 ft)
Nominal Coverage Angle : 120° H x 110° V
Directivity Factor (Q) : 5.2 dB, averaged 500 Hz to 10 kHz
Directivity Index (DI) : 7.1 dB, averaged 500 Hz to 10 kHz
Nominal Impedance : 4 ohms
Crossover Network : 3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF, 3rd order High
Pass, HF, plus conjugate shaping circuitry.
Low Frequency : 250 mm (10 in) fiberglass/Kevlar® cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former, neodymium magnet
Mid Frequency : 125 mm (5 in) anodized aluminum cone with EPDM rubber (Terpolymer of Ethylene and
Propylene) surround, 25 mm (1 in) voice coil on fiberglass former
High Frequency : 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure Material : High Impact PolyStyrene (HIPS) with 10% glass fill plus patent pending internal 5 mm foamed polyurethane secondary mold
Grille : Thermoset composite coated steel, WeatherMax multi-layer foam
Overload Protection : SonicGuard full range power limiting to protect

Control 25AV

Compact Indoor Outdoor Background Foreground Loudspeaker
Features :
jbl3Video shielded for use near video monitors. Extremely smooth frequency response. Stainless steel grill for harsh environments.
60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
SonicGuard™ overload protection.
130 mm (5.25 in) polypropylene coated woofer,
10 mm (.75 in) titanium coated horn-loaded tweeter.
Includes InvisiBall® mounting hardware and sealed input panel cover.
Screw-down input terminals.
100° x 100° high frequency horn.

Specifications :
Frequency Range : 70 Hz – 23 kHz (-10 dB)70 Hz – 23 kHz (-10 dB)
Power Capacity : 200 W Continuous Program Power 100 W Continuous Pink Noise
Transformer Taps : 170V: 60 W, 30 W, 15 W, 7.5 W taps (Taps #4,#3, #2 & #1)
100V: 60 W, 30 W, 15 W taps (Taps #3, #2, & #1)
Nominal Sensitivity : 87 dB SPL, 1 W @ 1 m (3.3 ft) Midrange (±1.5 dB, typical) : 130 Hz – 14 kHz
Nominal Coverage : 100° x 100°
Maximum SPL @ 1m : 113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB
continuous average music or speech
Directivity Factor (Q) : 4.9 dB, averaged 500 Hz to 4 kHz
Directivity Index (DI) : 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance : 8 ohms
Minimum Impedance : 6.7 ohms at 230 Hz
Crossover Network : Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response
Low Frequency : 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
High-Frequency : 20 mm (.75 in) titanium coated PEI Enclosure Material : High Impact polystyrene
Grille : Painted stainless steel, black or white to match cabinet, paintable
Overload Protection : Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
Environmental : Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
Terminations : Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers,
accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
Safety Agency Rating : Transformer is listed per UL1876
Colors : Black or white (-WH)
Rotation : Against wall on InvisiBall Base: 37° vertical 44° horizontal On bracket: 44° all directions
Dimensions (H x W x D) : 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight (ea) : 4.0 kg (9 lb)
Shipping Weight (ea) : 9.0 kg (20 lb) per pair
Included Accessories : 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench

Control SB-2

jbl4Stereo Input Dual Coil Subwoofer The Control SB-2 provides low frequency reinforcement in subwoofer/satellite systems. The Control SB-2 is ideal for foreground music and music/paging systems in restaurants, retail establishments, theme bars, music cafes, health clubs, and other indoor applications.

Features :
Components: 250 mm (10 in) dual voice coil transducer.
Stereo inputs with high-pass outputs for satellite speakers.
Slot-load vented bandpass design.
Complemented full range Control Contractor Series systems.
High Sensitivity: 100 dB, 1 W, 1 m.

Specifications :
Frequency Range : 38 Hz – 160 kHz
(-10 dB)
Power Capacity : 340 W (both inputs driven)
Sensitivity : 100 dB (1W, 1m)
at corner
Nominal Impedance : 8 ohms per input; 4 ohms total
Network Filter to Subwoofer : 12 dB / oct low-pass (per input), 160 Hz.
Acoustic Filtering : 6 dB/ oct lo-pass filtering via slot load design, 80
Hz
Network Filter Satellite Outputs : 6 dB/ oct high-pass (per output).
Drivers : 250 mm (10 inn) long throw with dual voice
coils.
Enclosure Material : Particle Board
Terminations : Spring terminals, accepts banana plugs. Left In,
Right In, Left Satellite Out, and Right Satellite
Out.
Installation Accessories : MTC_SB2W for installing SB-2 onto a wall or into a corner. MTC-SB2C for suspending SB-2 from a ceiling.
Dimensions (H x W x D) : 394 x 585 x 343mm (15.5 x 23.0 x 13.5 in.)
Net Weight (ea) : 19.1 kg (42 lb)
Shipping Weight (ea) : 22.7 kg (50 lb)

Control SB210

jbl5Dual 10 in. Indoor / Outdoor High Output Compact Subwoofer
The Control SB210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.

Features :
2 x 250 mm (10 in ) Aluminum/ Ceramic Composite Cone Drivers.
400 W Power Handling.
Fully Outdoor Capable Design.
SonicGuard™ Overload Protection.
13 x M6 Suspension Inserts for Optional U-Bracket.
AV Shielded.
Compact, Low Profile Design.

Specifications :
Frequency Range : 42 Hz – 200 kHz (-10 dB)
Power Capacity : 800 W Continuous Program Power 4000 W Continuous Pink Noise
Nominal Sensitivity : 95 dB, 1 W @ 1 M in half space (2 in loading)
Frequency Response : 48 Hz – 120 Hz ( ± 3 dB)
Maximum SPL @ 1m : 122 dB (in half – space)
Nominal Impedance : 8 Ohms
Minimum Impedance : 7 Ohms at 100 Hz
Low Frequency : 2 x 250 mm (10 in) dia., 50 mm (2 in) edge
wound ribbon voice coil, Aluminum/Ceramic
Composite cone.
Enclosure Material : High Impact PolyStyrene (HIPS) w / internal 8
mm polyurethane co-mold.
Grille : Thermoset composite coated steel, multi-layer.
Overload Protection : SonicGuard™
Environmental : IEC 529 IP-X% rating. Exceeds MilSpec 810 for
humidity, salt spray, temperature& UV. Passes
Mil-STd-202F for salt spray.
Terminations : Screw-down terminal strips, zinc plated copper
base, nickel-plated metal screw/washers.
Accepts up to 9 mm outside, 4 mm inside open
lug (#6, #8 or #10 lug), plus bare wire (up to
AWG/2.5mm2).
Colors : Black or White (-WH)
Dimensions ( H x W x D) : 3555 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
Net Weight (ea) : 17.1 kg (38 lb)
Shipping Weight (ea) : 19.4 kg (43 lb)

The Source for Northwest Media News and Information

.